The floor duty decides the system.
Rayson is a Singapore manufacturer of industrial floor coating systems, including epoxy, PU-cement, anti-slip and specialist flooring products supported by published technical data sheets. Traffic, moisture, chemistry, cleaning and the shutdown window determine how the system should be built.
A reliable industrial floor starts with assessed concrete. Preparation, primer, body coat, final surface and ownership all have to be defined around the same operating duty.
Choose the real risk first. These are preliminary system directions; the final specification still needs the site and relevant TDS checked.
Wheel loads, turning frequency and cleaning requirements determine whether a seamless self-levelling wearing surface is required.
Open technical data: RY-TDS-101RY-TDS-401
Hot wash-down, drainage and the actual chemicals on the floor must decide the system before appearance does.
Open technical data: RY-TDS-601
When water meets people or tyres, the system must balance traction, cleanability and the details that direct water away.
Open technical data: RY-TDS-801RY-TDS-706
Where the work window is limited, substrate condition, low-odour requirements and return-to-service planning must be reviewed together.
Open technical data: RY-TDS-301RY-TDS-302
Each route starts with prepared substrate and operating exposure; confirm the final product and build-up against the relevant TDS.
If the existing floor is peeling, cracking, contaminated or covered by an unknown coating, start with the surface diagnosis guide.
Assess the substrate, residual moisture and primer compatibility first.
Entrances, ramps and open-sided zones need texture and drainage considered together.
Frequency, temperature and actual contact determine the system route.
Preparation, application and return to service must fit the operating calendar.
Do not force one product across every area. Define the real duty zone by zone, then build a coherent system for the facility.
Send the substrate, area, current condition, operating duty and available work window. Rayson will give an initial response within one working day.
Start with actual wheel loading, turning frequency, substrate condition and cleaning requirements. A self-levelling epoxy route such as PrimeBond E20 and LevelShield SL120 is commonly reviewed for forklift and production-floor traffic, but the final system should be checked against the site and product TDS.
PU-cement is considered where hot wash-down, wet processing, thermal cycling or the actual chemical exposure make those conditions more important than a standard dry-floor epoxy route. PurScreed PC70 is Rayson's PU-cement screed; confirm the intended exposure against its current TDS.
Sometimes. A sound, compatible coating may be mechanically prepared and overcoated; a delaminating or contaminated coating may need removal and repair first. An adhesion and substrate assessment is the right starting point.
Return-to-service timing depends on the selected product, temperature, film build, substrate and actual traffic. Use the relevant product TDS and confirm the project programme with Rayson's technical team rather than relying on a generic cure-time claim.
The substrate and system decide this. Many systems rely on a primer to bond to prepared concrete, while selected self-priming products have their own published application route. Follow the relevant TDS and system recommendation.
Rayson is a Singapore manufacturer of high-performance protective coating systems. We support system selection, technical documentation and application guidance for specifiers, contractors and facility teams, and can connect projects with experienced applicators.
Industrial floor coating cost in Singapore depends on substrate preparation, floor area, system thickness, operating exposure, access and the available shutdown window. Rayson reviews these conditions before recommending a system and preparing a quotation.
Tell us your surface, area and timeline — our Singapore technical team will recommend a practical system and price it fast.
Rayson assistant
Answers from Rayson's own product information
Guidance only — confirm specifications with the Rayson technical team.