Food and beverage floors must survive hot wash-downs, fats and acids, and support hygiene audits. Rayson PurScreed polyurethane-cement and sealed epoxy systems provide seamless, cleanable floors for production, packing and cold-room areas.
Solvent-free · damp tolerant
Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.
For highly absorbent substrates
Rayson PrimeBond E25 is a two-component, medium-viscosity, solvent-free epoxy bonding primer for dry or damp substrates — formulated to wet out and anchor to highly absorbent concrete, screed, asphalt and prepared metal.
Smooth or anti-slip finish
Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.
Self-smoothing · solvent-free
Rayson LevelShield SL120 is a solvent-free, two-component, self-smoothing epoxy floor system that delivers a seamless wearing surface with medium to heavy chemical resistance and high mechanical strength.
1.5–3 mm · four-part system
Rayson PurScreed PC70 is a four-part, water-based polyurethane-cement self-smoothing screed installed at 1.5–3 mm for medium to heavy-duty industrial floors with high chemical resistance.
Two-part epoxy repair system
Rayson PatchBond TX80 is a two-component, solvent-free thixotropic epoxy adhesive and repair compound with exceptional sag resistance that bonds and fills on vertical, overhead and even mat-damp concrete surfaces.
Single-pack · 5.25 or 21 kg
Rayson SealForce RC40 is a two-component, cold-applied aliphatic polyurea waterproofing membrane for exposed roofs — roller-, brush- or spray-applied, UV-stable and walkable, with certified cool-roof reflectance.
Fast-curing spray polyurea
Rayson SealForce SP200 is a hot spray-applied, 100% solids, rapid-curing pure polyurea membrane that forms a seamless, chemically resistant waterproof and protective lining on concrete and steel.
Single-part · 400 L
Rayson SealForce SP210 is a hot spray-applied, 100% solids pure polyurea membrane that forms a seamless, potable-grade waterproof lining on concrete and steel tanks, reservoirs and containment structures.
This is a typical build-up. The exact system depends on your conditions — confirm the specification with our technical team.
Technical data sheets for the products above are in the TDS library. For a specification tailored to your project, contact our technical team.
Get in touch early if:
Tell us your surface, area and timeline — our Singapore technical team will recommend a practical system and price it fast.
Rayson assistant
Answers from Rayson's own product information
Guidance only — confirm specifications with the Rayson technical team.